add system configuration

configuration/crontab/crontab

@@ -0,0 +1,2 @@
+0 2	* * *	root	/usr/local/bin/gpio -g write 4 on ; sleep 1 ; /usr/local/bin/gpio -g write 4 off
+

configuration/crontab/info

@@ -0,0 +1,5 @@
+
+    add the content of crontab to /etc/crontab
+
+    this will lock the door everyday at 2 o'clock
+

configuration/etc/dnsmasq.conf

@@ -0,0 +1,666 @@
+# Configuration file for dnsmasq.
+#
+# Format is one option per line, legal options are the same
+# as the long options legal on the command line. See
+# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
+
+# Listen on this specific port instead of the standard DNS port
+# (53). Setting this to zero completely disables DNS function,
+# leaving only DHCP and/or TFTP.
+#port=5353
+
+# The following two options make you a better netizen, since they
+# tell dnsmasq to filter out queries which the public DNS cannot
+# answer, and which load the servers (especially the root servers)
+# unnecessarily. If you have a dial-on-demand link they also stop
+# these requests from bringing up the link unnecessarily.
+
+# Never forward plain names (without a dot or domain part)
+#domain-needed
+# Never forward addresses in the non-routed address spaces.
+#bogus-priv
+
+# Uncomment these to enable DNSSEC validation and caching:
+# (Requires dnsmasq to be built with DNSSEC option.)
+#conf-file=%%PREFIX%%/share/dnsmasq/trust-anchors.conf
+#dnssec
+
+# Replies which are not DNSSEC signed may be legitimate, because the domain
+# is unsigned, or may be forgeries. Setting this option tells dnsmasq to
+# check that an unsigned reply is OK, by finding a secure proof that a DS 
+# record somewhere between the root and the domain does not exist. 
+# The cost of setting this is that even queries in unsigned domains will need
+# one or more extra DNS queries to verify.
+#dnssec-check-unsigned
+
+# Uncomment this to filter useless windows-originated DNS requests
+# which can trigger dial-on-demand links needlessly.
+# Note that (amongst other things) this blocks all SRV requests,
+# so don't use it if you use eg Kerberos, SIP, XMMP or Google-talk.
+# This option only affects forwarding, SRV records originating for
+# dnsmasq (via srv-host= lines) are not suppressed by it.
+#filterwin2k
+
+# Change this line if you want dns to get its upstream servers from
+# somewhere other that /etc/resolv.conf
+#resolv-file=
+
+# By  default,  dnsmasq  will  send queries to any of the upstream
+# servers it knows about and tries to favour servers to are  known
+# to  be  up.  Uncommenting this forces dnsmasq to try each query
+# with  each  server  strictly  in  the  order  they   appear   in
+# /etc/resolv.conf
+#strict-order
+
+# If you don't want dnsmasq to read /etc/resolv.conf or any other
+# file, getting its servers from this file instead (see below), then
+# uncomment this.
+#no-resolv
+
+# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
+# files for changes and re-read them then uncomment this.
+#no-poll
+
+# Add other name servers here, with domain specs if they are for
+# non-public domains.
+#server=/localnet/192.168.0.1
+
+# Example of routing PTR queries to nameservers: this will send all
+# address->name queries for 192.168.3/24 to nameserver 10.1.2.3
+#server=/3.168.192.in-addr.arpa/10.1.2.3
+
+# Add local-only domains here, queries in these domains are answered
+# from /etc/hosts or DHCP only.
+#local=/localnet/
+
+# Add domains which you want to force to an IP address here.
+# The example below send any host in double-click.net to a local
+# web-server.
+#address=/double-click.net/127.0.0.1
+
+# --address (and --server) work with IPv6 addresses too.
+#address=/www.thekelleys.org.uk/fe80::20d:60ff:fe36:f83
+
+# Add the IPs of all queries to yahoo.com, google.com, and their
+# subdomains to the vpn and search ipsets:
+#ipset=/yahoo.com/google.com/vpn,search
+
+# You can control how dnsmasq talks to a server: this forces
+# queries to 10.1.2.3 to be routed via eth1
+# server=10.1.2.3@eth1
+
+# and this sets the source (ie local) address used to talk to
+# 10.1.2.3 to 192.168.1.1 port 55 (there must be a interface with that
+# IP on the machine, obviously).
+# server=10.1.2.3@192.168.1.1#55
+
+# If you want dnsmasq to change uid and gid to something other
+# than the default, edit the following lines.
+#user=
+#group=
+
+# If you want dnsmasq to listen for DHCP and DNS requests only on
+# specified interfaces (and the loopback) give the name of the
+# interface (eg eth0) here.
+# Repeat the line for more than one interface.
+interface=wlan0
+# Or you can specify which interface _not_ to listen on
+#except-interface=
+# Or which to listen on by address (remember to include 127.0.0.1 if
+# you use this.)
+listen-address=192.168.1.1
+# If you want dnsmasq to provide only DNS service on an interface,
+# configure it as shown above, and then use the following line to
+# disable DHCP and TFTP on it.
+#no-dhcp-interface=
+
+# On systems which support it, dnsmasq binds the wildcard address,
+# even when it is listening on only some interfaces. It then discards
+# requests that it shouldn't reply to. This has the advantage of
+# working even when interfaces come and go and change address. If you
+# want dnsmasq to really bind only the interfaces it is listening on,
+# uncomment this option. About the only time you may need this is when
+# running another nameserver on the same machine.
+bind-interfaces
+
+# If you don't want dnsmasq to read /etc/hosts, uncomment the
+# following line.
+#no-hosts
+# or if you want it to read another file, as well as /etc/hosts, use
+# this.
+#addn-hosts=/etc/banner_add_hosts
+
+# Set this (and domain: see below) if you want to have a domain
+# automatically added to simple names in a hosts-file.
+#expand-hosts
+
+# Set the domain for dnsmasq. this is optional, but if it is set, it
+# does the following things.
+# 1) Allows DHCP hosts to have fully qualified domain names, as long
+#     as the domain part matches this setting.
+# 2) Sets the "domain" DHCP option thereby potentially setting the
+#    domain of all systems configured by DHCP
+# 3) Provides the domain part for "expand-hosts"
+domain=kraut.space
+
+# Set a different domain for a particular subnet
+#domain=wireless.thekelleys.org.uk,192.168.2.0/24
+
+# Same idea, but range rather then subnet
+#domain=reserved.thekelleys.org.uk,192.68.3.100,192.168.3.200
+
+# Uncomment this to enable the integrated DHCP server, you need
+# to supply the range of addresses available for lease and optionally
+# a lease time. If you have more than one network, you will need to
+# repeat this for each network on which you want to supply DHCP
+# service.
+dhcp-range=192.168.1.100,192.168.1.200,1h
+
+# This is an example of a DHCP range where the netmask is given. This
+# is needed for networks we reach the dnsmasq DHCP server via a relay
+# agent. If you don't know what a DHCP relay agent is, you probably
+# don't need to worry about this.
+#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h
+
+# This is an example of a DHCP range which sets a tag, so that
+# some DHCP options may be set only for this network.
+#dhcp-range=set:red,192.168.0.50,192.168.0.150
+
+# Use this DHCP range only when the tag "green" is set.
+#dhcp-range=tag:green,192.168.0.50,192.168.0.150,12h
+
+# Specify a subnet which can't be used for dynamic address allocation,
+# is available for hosts with matching --dhcp-host lines. Note that
+# dhcp-host declarations will be ignored unless there is a dhcp-range
+# of some type for the subnet in question.
+# In this case the netmask is implied (it comes from the network
+# configuration on the machine running dnsmasq) it is possible to give
+# an explicit netmask instead.
+#dhcp-range=192.168.0.0,static
+
+# Enable DHCPv6. Note that the prefix-length does not need to be specified
+# and defaults to 64 if missing/
+#dhcp-range=1234::2, 1234::500, 64, 12h
+
+# Do Router Advertisements, BUT NOT DHCP for this subnet.
+#dhcp-range=1234::, ra-only 
+
+# Do Router Advertisements, BUT NOT DHCP for this subnet, also try and
+# add names to the DNS for the IPv6 address of SLAAC-configured dual-stack 
+# hosts. Use the DHCPv4 lease to derive the name, network segment and 
+# MAC address and assume that the host will also have an
+# IPv6 address calculated using the SLAAC alogrithm.
+#dhcp-range=1234::, ra-names
+
+# Do Router Advertisements, BUT NOT DHCP for this subnet.
+# Set the lifetime to 46 hours. (Note: minimum lifetime is 2 hours.)
+#dhcp-range=1234::, ra-only, 48h
+
+# Do DHCP and Router Advertisements for this subnet. Set the A bit in the RA
+# so that clients can use SLAAC addresses as well as DHCP ones.
+#dhcp-range=1234::2, 1234::500, slaac
+
+# Do Router Advertisements and stateless DHCP for this subnet. Clients will
+# not get addresses from DHCP, but they will get other configuration information.
+# They will use SLAAC for addresses.
+#dhcp-range=1234::, ra-stateless
+
+# Do stateless DHCP, SLAAC, and generate DNS names for SLAAC addresses
+# from DHCPv4 leases.
+#dhcp-range=1234::, ra-stateless, ra-names
+
+# Do router advertisements for all subnets where we're doing DHCPv6
+# Unless overriden by ra-stateless, ra-names, et al, the router 
+# advertisements will have the M and O bits set, so that the clients
+# get addresses and configuration from DHCPv6, and the A bit reset, so the 
+# clients don't use SLAAC addresses.
+#enable-ra
+
+# Supply parameters for specified hosts using DHCP. There are lots
+# of valid alternatives, so we will give examples of each. Note that
+# IP addresses DO NOT have to be in the range given above, they just
+# need to be on the same network. The order of the parameters in these
+# do not matter, it's permissible to give name, address and MAC in any
+# order.
+
+# Always allocate the host with Ethernet address 11:22:33:44:55:66
+# The IP address 192.168.0.60
+#dhcp-host=11:22:33:44:55:66,192.168.0.60
+
+# Always set the name of the host with hardware address
+# 11:22:33:44:55:66 to be "fred"
+#dhcp-host=11:22:33:44:55:66,fred
+
+# Always give the host with Ethernet address 11:22:33:44:55:66
+# the name fred and IP address 192.168.0.60 and lease time 45 minutes
+#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
+
+# Give a host with Ethernet address 11:22:33:44:55:66 or
+# 12:34:56:78:90:12 the IP address 192.168.0.60. Dnsmasq will assume
+# that these two Ethernet interfaces will never be in use at the same
+# time, and give the IP address to the second, even if it is already
+# in use by the first. Useful for laptops with wired and wireless
+# addresses.
+#dhcp-host=11:22:33:44:55:66,12:34:56:78:90:12,192.168.0.60
+
+# Give the machine which says its name is "bert" IP address
+# 192.168.0.70 and an infinite lease
+#dhcp-host=bert,192.168.0.70,infinite
+
+# Always give the host with client identifier 01:02:02:04
+# the IP address 192.168.0.60
+#dhcp-host=id:01:02:02:04,192.168.0.60
+
+# Always give the Infiniband interface with hardware address
+# 80:00:00:48:fe:80:00:00:00:00:00:00:f4:52:14:03:00:28:05:81 the
+# ip address 192.168.0.61. The client id is derived from the prefix
+# ff:00:00:00:00:00:02:00:00:02:c9:00 and the last 8 pairs of
+# hex digits of the hardware address.
+#dhcp-host=id:ff:00:00:00:00:00:02:00:00:02:c9:00:f4:52:14:03:00:28:05:81,192.168.0.61
+
+# Always give the host with client identifier "marjorie"
+# the IP address 192.168.0.60
+#dhcp-host=id:marjorie,192.168.0.60
+
+# Enable the address given for "judge" in /etc/hosts
+# to be given to a machine presenting the name "judge" when
+# it asks for a DHCP lease.
+#dhcp-host=judge
+
+# Never offer DHCP service to a machine whose Ethernet
+# address is 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,ignore
+
+# Ignore any client-id presented by the machine with Ethernet
+# address 11:22:33:44:55:66. This is useful to prevent a machine
+# being treated differently when running under different OS's or
+# between PXE boot and OS boot.
+#dhcp-host=11:22:33:44:55:66,id:*
+
+# Send extra options which are tagged as "red" to
+# the machine with Ethernet address 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,set:red
+
+# Send extra options which are tagged as "red" to
+# any machine with Ethernet address starting 11:22:33:
+#dhcp-host=11:22:33:*:*:*,set:red
+
+# Give a fixed IPv6 address and name to client with 
+# DUID 00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2
+# Note the MAC addresses CANNOT be used to identify DHCPv6 clients.
+# Note also the they [] around the IPv6 address are obilgatory.
+#dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1234::5] 
+
+# Ignore any clients which are not specified in dhcp-host lines
+# or /etc/ethers. Equivalent to ISC "deny unknown-clients".
+# This relies on the special "known" tag which is set when
+# a host is matched.
+#dhcp-ignore=tag:!known
+
+# Send extra options which are tagged as "red" to any machine whose
+# DHCP vendorclass string includes the substring "Linux"
+#dhcp-vendorclass=set:red,Linux
+
+# Send extra options which are tagged as "red" to any machine one
+# of whose DHCP userclass strings includes the substring "accounts"
+#dhcp-userclass=set:red,accounts
+
+# Send extra options which are tagged as "red" to any machine whose
+# MAC address matches the pattern.
+#dhcp-mac=set:red,00:60:8C:*:*:*
+
+# If this line is uncommented, dnsmasq will read /etc/ethers and act
+# on the ethernet-address/IP pairs found there just as if they had
+# been given as --dhcp-host options. Useful if you keep
+# MAC-address/host mappings there for other purposes.
+#read-ethers
+
+# Send options to hosts which ask for a DHCP lease.
+# See RFC 2132 for details of available options.
+# Common options can be given to dnsmasq by name:
+# run "dnsmasq --help dhcp" to get a list.
+# Note that all the common settings, such as netmask and
+# broadcast address, DNS server and default route, are given
+# sane defaults by dnsmasq. You very likely will not need
+# any dhcp-options. If you use Windows clients and Samba, there
+# are some options which are recommended, they are detailed at the
+# end of this section.
+
+# Override the default route supplied by dnsmasq, which assumes the
+# router is the same machine as the one running dnsmasq.
+#dhcp-option=3,1.2.3.4
+
+# Do the same thing, but using the option name
+#dhcp-option=option:router,1.2.3.4
+
+# Override the default route supplied by dnsmasq and send no default
+# route at all. Note that this only works for the options sent by
+# default (1, 3, 6, 12, 28) the same line will send a zero-length option
+# for all other option numbers.
+#dhcp-option=3
+
+# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
+#dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5
+
+# Send DHCPv6 option. Note [] around IPv6 addresses.
+#dhcp-option=option6:dns-server,[1234::77],[1234::88]
+
+# Send DHCPv6 option for namservers as the machine running 
+# dnsmasq and another.
+#dhcp-option=option6:dns-server,[::],[1234::88]
+
+# Ask client to poll for option changes every six hours. (RFC4242)
+#dhcp-option=option6:information-refresh-time,6h
+
+# Set option 58 client renewal time (T1). Defaults to half of the
+# lease time if not specified. (RFC2132)
+#dhcp-option=option:T1:1m
+
+# Set option 59 rebinding time (T2). Defaults to 7/8 of the
+# lease time if not specified. (RFC2132)
+#dhcp-option=option:T2:2m
+
+# Set the NTP time server address to be the same machine as
+# is running dnsmasq
+#dhcp-option=42,0.0.0.0
+
+# Set the NIS domain name to "welly"
+#dhcp-option=40,welly
+
+# Set the default time-to-live to 50
+#dhcp-option=23,50
+
+# Set the "all subnets are local" flag
+#dhcp-option=27,1
+
+# Send the etherboot magic flag and then etherboot options (a string).
+#dhcp-option=128,e4:45:74:68:00:00
+#dhcp-option=129,NIC=eepro100
+
+# Specify an option which will only be sent to the "red" network
+# (see dhcp-range for the declaration of the "red" network)
+# Note that the tag: part must precede the option: part.
+#dhcp-option = tag:red, option:ntp-server, 192.168.1.1
+
+# The following DHCP options set up dnsmasq in the same way as is specified
+# for the ISC dhcpcd in
+# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
+# adapted for a typical dnsmasq installation where the host running
+# dnsmasq is also the host running samba.
+# you may want to uncomment some or all of them if you use
+# Windows clients and Samba.
+#dhcp-option=19,0           # option ip-forwarding off
+#dhcp-option=44,0.0.0.0     # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
+#dhcp-option=45,0.0.0.0     # netbios datagram distribution server
+#dhcp-option=46,8           # netbios node type
+
+# Send an empty WPAD option. This may be REQUIRED to get windows 7 to behave.
+#dhcp-option=252,"\n"
+
+# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client
+# probably doesn't support this......
+#dhcp-option=option:domain-search,eng.apple.com,marketing.apple.com
+
+# Send RFC-3442 classless static routes (note the netmask encoding)
+#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8
+
+# Send vendor-class specific options encapsulated in DHCP option 43.
+# The meaning of the options is defined by the vendor-class so
+# options are sent only when the client supplied vendor class
+# matches the class given here. (A substring match is OK, so "MSFT"
+# matches "MSFT" and "MSFT 5.0"). This example sets the
+# mtftp address to 0.0.0.0 for PXEClients.
+#dhcp-option=vendor:PXEClient,1,0.0.0.0
+
+# Send microsoft-specific option to tell windows to release the DHCP lease
+# when it shuts down. Note the "i" flag, to tell dnsmasq to send the
+# value as a four-byte integer - that's what microsoft wants. See
+# http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true
+#dhcp-option=vendor:MSFT,2,1i
+
+# Send the Encapsulated-vendor-class ID needed by some configurations of
+# Etherboot to allow is to recognise the DHCP server.
+#dhcp-option=vendor:Etherboot,60,"Etherboot"
+
+# Send options to PXELinux. Note that we need to send the options even
+# though they don't appear in the parameter request list, so we need
+# to use dhcp-option-force here.
+# See http://syslinux.zytor.com/pxe.php#special for details.
+# Magic number - needed before anything else is recognised
+#dhcp-option-force=208,f1:00:74:7e
+# Configuration file name
+#dhcp-option-force=209,configs/common
+# Path prefix
+#dhcp-option-force=210,/tftpboot/pxelinux/files/
+# Reboot time. (Note 'i' to send 32-bit value)
+#dhcp-option-force=211,30i
+
+# Set the boot filename for netboot/PXE. You will only need
+# this is you want to boot machines over the network and you will need
+# a TFTP server; either dnsmasq's built in TFTP server or an
+# external one. (See below for how to enable the TFTP server.)
+#dhcp-boot=pxelinux.0
+
+# The same as above, but use custom tftp-server instead machine running dnsmasq
+#dhcp-boot=pxelinux,server.name,192.168.1.100
+
+# Boot for Etherboot gPXE. The idea is to send two different
+# filenames, the first loads gPXE, and the second tells gPXE what to
+# load. The dhcp-match sets the gpxe tag for requests from gPXE.
+#dhcp-match=set:gpxe,175 # gPXE sends a 175 option.
+#dhcp-boot=tag:!gpxe,undionly.kpxe
+#dhcp-boot=mybootimage
+
+# Encapsulated options for Etherboot gPXE. All the options are
+# encapsulated within option 175
+#dhcp-option=encap:175, 1, 5b         # priority code
+#dhcp-option=encap:175, 176, 1b       # no-proxydhcp
+#dhcp-option=encap:175, 177, string   # bus-id
+#dhcp-option=encap:175, 189, 1b       # BIOS drive code
+#dhcp-option=encap:175, 190, user     # iSCSI username
+#dhcp-option=encap:175, 191, pass     # iSCSI password
+
+# Test for the architecture of a netboot client. PXE clients are
+# supposed to send their architecture as option 93. (See RFC 4578)
+#dhcp-match=peecees, option:client-arch, 0 #x86-32
+#dhcp-match=itanics, option:client-arch, 2 #IA64
+#dhcp-match=hammers, option:client-arch, 6 #x86-64
+#dhcp-match=mactels, option:client-arch, 7 #EFI x86-64
+
+# Do real PXE, rather than just booting a single file, this is an
+# alternative to dhcp-boot.
+#pxe-prompt="What system shall I netboot?"
+# or with timeout before first available action is taken:
+#pxe-prompt="Press F8 for menu.", 60
+
+# Available boot services. for PXE.
+#pxe-service=x86PC, "Boot from local disk"
+
+# Loads <tftp-root>/pxelinux.0 from dnsmasq TFTP server.
+#pxe-service=x86PC, "Install Linux", pxelinux
+
+# Loads <tftp-root>/pxelinux.0 from TFTP server at 1.2.3.4.
+# Beware this fails on old PXE ROMS.
+#pxe-service=x86PC, "Install Linux", pxelinux, 1.2.3.4
+
+# Use bootserver on network, found my multicast or broadcast.
+#pxe-service=x86PC, "Install windows from RIS server", 1
+
+# Use bootserver at a known IP address.
+#pxe-service=x86PC, "Install windows from RIS server", 1, 1.2.3.4
+
+# If you have multicast-FTP available,
+# information for that can be passed in a similar way using options 1
+# to 5. See page 19 of
+# http://download.intel.com/design/archives/wfm/downloads/pxespec.pdf
+
+
+# Enable dnsmasq's built-in TFTP server
+#enable-tftp
+
+# Set the root directory for files available via FTP.
+#tftp-root=/var/ftpd
+
+# Do not abort if the tftp-root is unavailable
+#tftp-no-fail
+
+# Make the TFTP server more secure: with this set, only files owned by
+# the user dnsmasq is running as will be send over the net.
+#tftp-secure
+
+# This option stops dnsmasq from negotiating a larger blocksize for TFTP
+# transfers. It will slow things down, but may rescue some broken TFTP
+# clients.
+#tftp-no-blocksize
+
+# Set the boot file name only when the "red" tag is set.
+#dhcp-boot=tag:red,pxelinux.red-net
+
+# An example of dhcp-boot with an external TFTP server: the name and IP
+# address of the server are given after the filename.
+# Can fail with old PXE ROMS. Overridden by --pxe-service.
+#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
+
+# If there are multiple external tftp servers having a same name
+# (using /etc/hosts) then that name can be specified as the
+# tftp_servername (the third option to dhcp-boot) and in that
+# case dnsmasq resolves this name and returns the resultant IP
+# addresses in round robin fasion. This facility can be used to
+# load balance the tftp load among a set of servers.
+#dhcp-boot=/var/ftpd/pxelinux.0,boothost,tftp_server_name
+
+# Set the limit on DHCP leases, the default is 150
+#dhcp-lease-max=150
+
+# The DHCP server needs somewhere on disk to keep its lease database.
+# This defaults to a sane location, but if you want to change it, use
+# the line below.
+#dhcp-leasefile=/var/lib/misc/dnsmasq.leases
+
+# Set the DHCP server to authoritative mode. In this mode it will barge in
+# and take over the lease for any client which broadcasts on the network,
+# whether it has a record of the lease or not. This avoids long timeouts
+# when a machine wakes up on a new network. DO NOT enable this if there's
+# the slightest chance that you might end up accidentally configuring a DHCP
+# server for your campus/company accidentally. The ISC server uses
+# the same option, and this URL provides more information:
+# http://www.isc.org/files/auth.html
+dhcp-authoritative
+
+# Run an executable when a DHCP lease is created or destroyed.
+# The arguments sent to the script are "add" or "del",
+# then the MAC address, the IP address and finally the hostname
+# if there is one.
+#dhcp-script=/bin/echo
+
+# Set the cachesize here.
+#cache-size=150
+
+# If you want to disable negative caching, uncomment this.
+#no-negcache
+
+# Normally responses which come from /etc/hosts and the DHCP lease
+# file have Time-To-Live set as zero, which conventionally means
+# do not cache further. If you are happy to trade lower load on the
+# server for potentially stale date, you can set a time-to-live (in
+# seconds) here.
+#local-ttl=
+
+# If you want dnsmasq to detect attempts by Verisign to send queries
+# to unregistered .com and .net hosts to its sitefinder service and
+# have dnsmasq instead return the correct NXDOMAIN response, uncomment
+# this line. You can add similar lines to do the same for other
+# registries which have implemented wildcard A records.
+#bogus-nxdomain=64.94.110.11
+
+# If you want to fix up DNS results from upstream servers, use the
+# alias option. This only works for IPv4.
+# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
+#alias=1.2.3.4,5.6.7.8
+# and this maps 1.2.3.x to 5.6.7.x
+#alias=1.2.3.0,5.6.7.0,255.255.255.0
+# and this maps 192.168.0.10->192.168.0.40 to 10.0.0.10->10.0.0.40
+#alias=192.168.0.10-192.168.0.40,10.0.0.0,255.255.255.0
+
+# Change these lines if you want dnsmasq to serve MX records.
+
+# Return an MX record named "maildomain.com" with target
+# servermachine.com and preference 50
+#mx-host=maildomain.com,servermachine.com,50
+
+# Set the default target for MX records created using the localmx option.
+#mx-target=servermachine.com
+
+# Return an MX record pointing to the mx-target for all local
+# machines.
+#localmx
+
+# Return an MX record pointing to itself for all local machines.
+#selfmx
+
+# Change the following lines if you want dnsmasq to serve SRV
+# records.  These are useful if you want to serve ldap requests for
+# Active Directory and other windows-originated DNS requests.
+# See RFC 2782.
+# You may add multiple srv-host lines.
+# The fields are <name>,<target>,<port>,<priority>,<weight>
+# If the domain part if missing from the name (so that is just has the
+# service and protocol sections) then the domain given by the domain=
+# config option is used. (Note that expand-hosts does not need to be
+# set for this to work.)
+
+# A SRV record sending LDAP for the example.com domain to
+# ldapserver.example.com port 389
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389
+
+# A SRV record sending LDAP for the example.com domain to
+# ldapserver.example.com port 389 (using domain=)
+#domain=example.com
+#srv-host=_ldap._tcp,ldapserver.example.com,389
+
+# Two SRV records for LDAP, each with different priorities
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2
+
+# A SRV record indicating that there is no LDAP server for the domain
+# example.com
+#srv-host=_ldap._tcp.example.com
+
+# The following line shows how to make dnsmasq serve an arbitrary PTR
+# record. This is useful for DNS-SD. (Note that the
+# domain-name expansion done for SRV records _does_not
+# occur for PTR records.)
+#ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services"
+
+# Change the following lines to enable dnsmasq to serve TXT records.
+# These are used for things like SPF and zeroconf. (Note that the
+# domain-name expansion done for SRV records _does_not
+# occur for TXT records.)
+
+#Example SPF.
+#txt-record=example.com,"v=spf1 a -all"
+
+#Example zeroconf
+#txt-record=_http._tcp.example.com,name=value,paper=A4
+
+# Provide an alias for a "local" DNS name. Note that this _only_ works
+# for targets which are names from DHCP or /etc/hosts. Give host
+# "bert" another name, bertrand
+#cname=bertand,bert
+
+# For debugging purposes, log each DNS query as it passes through
+# dnsmasq.
+#log-queries
+
+# Log lots of extra information about DHCP transactions.
+#log-dhcp
+
+# Include another lot of configuration options.
+#conf-file=/etc/dnsmasq.more.conf
+#conf-dir=/etc/dnsmasq.d
+
+# Include all the files in a directory except those ending in .bak
+#conf-dir=/etc/dnsmasq.d,.bak
+
+# Include all files in a directory which end in .conf
+#conf-dir=/etc/dnsmasq.d/,*.conf

configuration/etc/hosts

@@ -0,0 +1,9 @@
+127.0.0.1	localhost
+::1		localhost ip6-localhost ip6-loopback
+ff02::1		ip6-allnodes
+ff02::2		ip6-allrouters
+
+127.0.1.1	sttib
+192.168.1.1     tuer.kraut.space
+
+

configuration/etc/network/interfaces

@@ -0,0 +1,35 @@
+# interfaces(5) file used by ifup(8) and ifdown(8)
+
+# Please note that this file is written to be used with dhcpcd
+# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'
+
+# Include files from /etc/network/interfaces.d:
+source-directory /etc/network/interfaces.d
+
+auto lo
+iface lo inet loopback
+
+auto eth0
+iface eth0 inet static
+    address 172.22.239.132
+    netmask 255.255.255.192
+    gateway 172.22.239.129
+
+
+#allow-hotplug wlan0
+#iface wlan0 inet manual
+#    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
+
+#allow-hotplug wlan1
+#iface wlan1 inet manual
+#    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
+
+auto wlan0
+iface wlan0 inet static
+    address 192.168.1.1
+    netmask 255.255.255.0
+#    wireless-channel 5
+#    wireless-essid knockknock
+#    wireless-mode AP
+#    wireless-key off
+

configuration/etc/nginx/certs/info

@@ -0,0 +1,5 @@
+
+this folder should contain
+
+fullchain.pem
+privkey.pem

configuration/etc/nginx/fastcgi.conf

@@ -0,0 +1,26 @@
+
+fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;
+fastcgi_param  QUERY_STRING       $query_string;
+fastcgi_param  REQUEST_METHOD     $request_method;
+fastcgi_param  CONTENT_TYPE       $content_type;
+fastcgi_param  CONTENT_LENGTH     $content_length;
+
+fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
+fastcgi_param  REQUEST_URI        $request_uri;
+fastcgi_param  DOCUMENT_URI       $document_uri;
+fastcgi_param  DOCUMENT_ROOT      $document_root;
+fastcgi_param  SERVER_PROTOCOL    $server_protocol;
+fastcgi_param  REQUEST_SCHEME     $scheme;
+fastcgi_param  HTTPS              $https if_not_empty;
+
+fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
+fastcgi_param  SERVER_SOFTWARE    nginx/$nginx_version;
+
+fastcgi_param  REMOTE_ADDR        $remote_addr;
+fastcgi_param  REMOTE_PORT        $remote_port;
+fastcgi_param  SERVER_ADDR        $server_addr;
+fastcgi_param  SERVER_PORT        $server_port;
+fastcgi_param  SERVER_NAME        $server_name;
+
+# PHP only, required if PHP was built with --enable-force-cgi-redirect
+fastcgi_param  REDIRECT_STATUS    200;

configuration/etc/nginx/fastcgi_params

@@ -0,0 +1,25 @@
+
+fastcgi_param  QUERY_STRING       $query_string;
+fastcgi_param  REQUEST_METHOD     $request_method;
+fastcgi_param  CONTENT_TYPE       $content_type;
+fastcgi_param  CONTENT_LENGTH     $content_length;
+
+fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
+fastcgi_param  REQUEST_URI        $request_uri;
+fastcgi_param  DOCUMENT_URI       $document_uri;
+fastcgi_param  DOCUMENT_ROOT      $document_root;
+fastcgi_param  SERVER_PROTOCOL    $server_protocol;
+fastcgi_param  REQUEST_SCHEME     $scheme;
+fastcgi_param  HTTPS              $https if_not_empty;
+
+fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
+fastcgi_param  SERVER_SOFTWARE    nginx/$nginx_version;
+
+fastcgi_param  REMOTE_ADDR        $remote_addr;
+fastcgi_param  REMOTE_PORT        $remote_port;
+fastcgi_param  SERVER_ADDR        $server_addr;
+fastcgi_param  SERVER_PORT        $server_port;
+fastcgi_param  SERVER_NAME        $server_name;
+
+# PHP only, required if PHP was built with --enable-force-cgi-redirect
+fastcgi_param  REDIRECT_STATUS    200;

configuration/etc/nginx/nginx.conf

@@ -0,0 +1,86 @@
+user www-data;
+worker_processes auto;
+pid /run/nginx.pid;
+include /etc/nginx/modules-enabled/*.conf;
+
+events {
+	worker_connections 768;
+	# multi_accept on;
+}
+
+http {
+
+	##
+	# Basic Settings
+	##
+
+	sendfile on;
+	tcp_nopush on;
+	tcp_nodelay on;
+	keepalive_timeout 65;
+	types_hash_max_size 2048;
+	# server_tokens off;
+
+	# server_names_hash_bucket_size 64;
+	# server_name_in_redirect off;
+
+	include /etc/nginx/mime.types;
+	default_type application/octet-stream;
+
+	##
+	# SSL Settings
+	##
+
+	ssl_protocols TLSv1 TLSv1.1 TLSv1.2; # Dropping SSLv3, ref: POODLE
+	ssl_prefer_server_ciphers on;
+
+	##
+	# Logging Settings
+	##
+
+	access_log none;
+	error_log /var/log/nginx/error.log;
+
+	##
+	# Gzip Settings
+	##
+
+	gzip on;
+	gzip_disable "msie6";
+
+	# gzip_vary on;
+	# gzip_proxied any;
+	# gzip_comp_level 6;
+	# gzip_buffers 16 8k;
+	# gzip_http_version 1.1;
+	# gzip_types text/plain text/css application/json application/javascript text/xml application/xml application/xml+rss text/javascript;
+
+	##
+	# Virtual Host Configs
+	##
+
+	include /etc/nginx/conf.d/*.conf;
+	include /etc/nginx/sites-enabled/*;
+}
+
+
+#mail {
+#	# See sample authentication script at:
+#	# http://wiki.nginx.org/ImapAuthenticateWithApachePhpScript
+# 
+#	# auth_http localhost/auth.php;
+#	# pop3_capabilities "TOP" "USER";
+#	# imap_capabilities "IMAP4rev1" "UIDPLUS";
+# 
+#	server {
+#		listen     localhost:110;
+#		protocol   pop3;
+#		proxy      on;
+#	}
+# 
+#	server {
+#		listen     localhost:143;
+#		protocol   imap;
+#		proxy      on;
+#	}
+#}

configuration/etc/nginx/scgi_params

@@ -0,0 +1,17 @@
+
+scgi_param  REQUEST_METHOD     $request_method;
+scgi_param  REQUEST_URI        $request_uri;
+scgi_param  QUERY_STRING       $query_string;
+scgi_param  CONTENT_TYPE       $content_type;
+
+scgi_param  DOCUMENT_URI       $document_uri;
+scgi_param  DOCUMENT_ROOT      $document_root;
+scgi_param  SCGI               1;
+scgi_param  SERVER_PROTOCOL    $server_protocol;
+scgi_param  REQUEST_SCHEME     $scheme;
+scgi_param  HTTPS              $https if_not_empty;
+
+scgi_param  REMOTE_ADDR        $remote_addr;
+scgi_param  REMOTE_PORT        $remote_port;
+scgi_param  SERVER_PORT        $server_port;
+scgi_param  SERVER_NAME        $server_name;

configuration/etc/nginx/sites-available/sttib

@@ -0,0 +1,61 @@
+
+# Default server configuration
+#
+server {
+        listen 80 default_server;
+        listen [::]:80 default_server;
+
+        access_log /var/log/nginx/tuer.kraut.space_access.log;
+        error_log /var/log/nginx/tuer.kraut.space_error.log;
+
+        location / { 
+                return 301 https://$host$request_uri?;
+          }
+}
+server {
+        # SSL configuration
+        #
+        listen 443 ssl default_server;
+        listen [::]:443 ssl default_server;
+        #
+        # Self signed certs generated by the ssl-cert package
+        # Don't use them in a production server!
+        #
+        ssl_certificate /etc/nginx/certs/fullchain.pem;
+        ssl_certificate_key /etc/nginx/certs/privkey.pem;
+
+        # Add index.php to the list if you are using PHP
+        index index.html index.htm index.nginx-debian.html;
+
+        server_name tuer.kraut.space;
+
+    error_page 404 /404.html;
+
+    location ~ /(404.html|style.css|doc/|media/) {
+        root /var/www/html;
+
+        # First attempt to serve request as file, then
+        # as directory, then fall back to displaying a 404.
+        try_files $uri $uri/ =404;
+    }
+
+    location /cgi-bin/kraut.space {
+                return 301 /;
+    }
+
+    location / {
+        try_files $uri $uri/ /index.html;
+        default_type text/html;
+        gzip           off;
+        include        fastcgi_params;
+        fastcgi_pass   unix:/var/run/fcgiwrap.socket;
+
+        fastcgi_param  SCRIPT_FILENAME /var/www/cgi-bin/kraut.space;
+
+        # According to RFC3875 (https://tools.ietf.org/html/rfc3875#section-4.1.14) in SERVER_NAME
+        # we should put actual hostname user came to. For nginx it is in $host
+        # This will allow to run multihost instances
+        fastcgi_param  SERVER_NAME        $host;
+    }
+
+}

configuration/etc/nginx/sites-enabled/sttib

@@ -0,0 +1 @@
+../sites-available/sttib

configuration/etc/nginx/uwsgi_params

@@ -0,0 +1,17 @@
+
+uwsgi_param  QUERY_STRING       $query_string;
+uwsgi_param  REQUEST_METHOD     $request_method;
+uwsgi_param  CONTENT_TYPE       $content_type;
+uwsgi_param  CONTENT_LENGTH     $content_length;
+
+uwsgi_param  REQUEST_URI        $request_uri;
+uwsgi_param  PATH_INFO          $document_uri;
+uwsgi_param  DOCUMENT_ROOT      $document_root;
+uwsgi_param  SERVER_PROTOCOL    $server_protocol;
+uwsgi_param  REQUEST_SCHEME     $scheme;
+uwsgi_param  HTTPS              $https if_not_empty;
+
+uwsgi_param  REMOTE_ADDR        $remote_addr;
+uwsgi_param  REMOTE_PORT        $remote_port;
+uwsgi_param  SERVER_PORT        $server_port;
+uwsgi_param  SERVER_NAME        $server_name;

configuration/etc/ssh/sshd_config

@@ -0,0 +1,95 @@
+# Package generated configuration file
+# See the sshd_config(5) manpage for details
+
+# What ports, IPs and protocols we listen for
+Port 22
+# Use these options to restrict which interfaces/protocols sshd will bind to
+#ListenAddress ::
+#ListenAddress 172.22.239.132
+Protocol 2
+# HostKeys for protocol version 2
+HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+HostKey /etc/ssh/ssh_host_ed25519_key
+#Privilege Separation is turned on for security
+UsePrivilegeSeparation yes
+
+KexAlgorithms curve25519-sha256@libssh.org,diffie-hellman-group-exchange-sha256
+MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com
+
+Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr
+
+# Lifetime and size of ephemeral version 1 server key
+KeyRegenerationInterval 3600
+ServerKeyBits 1024
+
+# Logging
+SyslogFacility AUTH
+LogLevel INFO
+
+# Authentication:
+LoginGraceTime 120
+PermitRootLogin without-password
+StrictModes yes
+
+RSAAuthentication yes
+PubkeyAuthentication yes
+#AuthorizedKeysFile	%h/.ssh/authorized_keys
+
+# Don't read the user's ~/.rhosts and ~/.shosts files
+IgnoreRhosts yes
+# For this to work you will also need host keys in /etc/ssh_known_hosts
+RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
+#IgnoreUserKnownHosts yes
+
+# To enable empty passwords, change to yes (NOT RECOMMENDED)
+PermitEmptyPasswords no
+
+# Change to yes to enable challenge-response passwords (beware issues with
+# some PAM modules and threads)
+ChallengeResponseAuthentication no
+
+# Change to no to disable tunnelled clear text passwords
+PasswordAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosGetAFSToken no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+X11Forwarding no
+X11DisplayOffset 10
+PrintMotd no
+PrintLastLog yes
+TCPKeepAlive yes
+#UseLogin no
+
+#MaxStartups 10:30:60
+#Banner /etc/issue.net
+
+# Allow client to pass locale environment variables
+AcceptEnv LANG LC_* GIT_*_NAME GIT_*_EMAIL PTX_*
+
+Subsystem sftp /usr/lib/openssh/sftp-server
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+AllowUsers wilma root

configuration/etc/tuer3.0/info

@@ -0,0 +1,4 @@
+
+this folder should contain
+
+door_access_list

configuration/etc/wpa_supplicant.conf

@@ -0,0 +1,4 @@
+network={
+    ssid="LOCALSSID"
+    psk="LOCALPASSPHRASE"
+}

configuration/readme.org

@@ -14,3 +14,11 @@
 
      systemctl enable /etc/systemd/system/activategpio.service.d/
 
+* System configuration /etc
+
+  - configure alike
+
+* crontab
+
+  - expand crontab
+

tools/door-deluser.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+MASTERFILE=/etc/tuer3.0/door_access_list
+STAMP=".backup."`date +%Y-%m-%dT%T.%N`
+
+USER="$1"
+# vielleicht später mal als hash
+#UHASH=`echo "$USER" | md5sum | tr --delete " -"`
+
+if [[ $1 == "" ]] ; then echo "Kein Nutzername angegeben"; exit; fi
+
+# Lösche alle Zeilen die mit $UHASH beginnen
+echo `sed "/^$USER;/!d" $MASTERFILE | wc -l`" Einträge gelöscht"
+sed --in-place=$STAMP "/^$USER;/d" $MASTERFILE
+

tools/door-genpw.sh

@@ -0,0 +1,40 @@
+#!/bin/bash
+
+if [[ $1 == "" ]] ; then
+    echo "Kein Nutzername angegeben. Passphrasengenerierung abgebrochen."
+    exit 1
+fi
+
+MASTERFILE=/etc/tuer3.0/door_access_list
+
+USER="$1"
+STAMP=`date +%Y-%m-%dT%T`
+FILE="./$USER.$STAMP.keyhash"
+PASSPHRASE=`tr -dc _a-z0-9 </dev/urandom | head -c 31`
+PPHASH=`echo "$PASSPHRASE" | sha512sum | tr --delete " -"`
+
+if [[ $2 == "to-master-file" ]] ; then
+    echo "$USER;$STAMP;$PPHASH">>$MASTERFILE
+else
+    echo "$USER;$STAMP;$PPHASH">>$FILE
+fi
+
+# Ausgabe
+TEXT="  Die neue Passphrase für den Nutzer $USER ist:\n\t$PASSPHRASE\n
+  Hinweis:\tDie Passphrase erscheint nur in diesem Dialog und im Terminal
+\t\tund wird sonst nirgendwo gespeichert. Sichere sie dir bitte!\n"
+echo -e "$TEXT"
+
+if [[ $2 == "to-master-file" ]] ; then
+    TEXT="  Die Schlüsseldaten wurden direkt in die Zugangsliste eingetragen"
+else
+    TEXT="  Es wurde eine Datei mit deinen Schlüsseldaten generiert. Ihr Name lautet:\n\t$FILE"
+fi
+echo -e "$TEXT"
+
+
+exit 0
+# später vielleicht
+#UHASH=`echo "$USER" | md5sum | tr --delete " -"`
+#PPHASH=`echo "$UHASH$STAMP$PASSPHRASE" | sha512sum | tr --delete " -"`
+#echo "$UHASH;$STAMP;$PPHASH">>$FILE

tools/door-insertkeyhash.sh

@@ -0,0 +1,16 @@
+#!/bin/bash
+
+MASTERFILE=/etc/tuer3.0/door_access_list
+
+if [[ $1 == "" ]] ; then
+    echo "Keine keyhash-Datei angegeben."
+    exit 1
+elif [ -e "$1" ] ; then
+    FILE="$1"
+    echo "Füge $FILE zu $MASTERFILE hinzu."
+    cat $FILE>>$MASTERFILE
+    exit 0
+fi
+echo "Angegebene keyhash-Datei existiert nicht."
+
+

tools/door-listusers.sh

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+MASTERFILE=/etc/tuer3.0/door_access_list
+
+if [[ $1 == "" ]] ; then
+    echo -e " Anzahl Nutzername"
+    cut --delimiter=";" -f1 $MASTERFILE | sort -n | uniq -c
+else
+    grep "^$1" $MASTERFILE | cut --delimiter=";" -f1-2 | tr ';' '\t'
+fi